• Meet Us On :

Temperature & Humidity test chamber



Temperature & Humidity test chamber

A.PERFORMANCE     [Room Temp at 20ºC, Air Cooled Type]

Temperature & Humidity test chamber

 Temp & Hum Control Range        See Graph below 

Temperature & Humidity test chamber

 1.Interior Material: Stainless Steel Plate (SUS#304)
 2.Exterior Material: A3 Steel Plate sprayed with special coating
 3.Insulation Material:Double-layer, High Temperature resistant and high Intensity seal is applied between the chamber door and chamber body to ensure high performance  
 4.Heater: Fin Heat Disperse Pipe Stainless Steel-Electric Heater
 5.Humidifier: Stainless Steel Heater with Auto Adjust
 6.Airflow Cycling System: Unique System for providing uniform airflow
 7.Door & Window: Single Door with Observation Window, (Heating cords set around the door to prevent Condensation)
 1.Compressor                               Hermetic Compressor - 2HP, Tecumseh
 Option B: two compressors; 
 Option C: two compressors; 
 Option D: two compressors
 2.Refrigerant Type:                       DuPont Type 404A (Without Fluorine)
 3.Condenser:                                 Air Cooled with Fan
 4.Evaporator:                                 Fin with several segments –Auto adjustment
 D.CONTROLLER                           PROGRAMMABLE COLOR LCD Model TEMI 800 

 Temperature & Humidity test chamber
 1.Controller Specifications           LCD DISPLAY COLOR TOUCH SCREEN KEY IN
 User friendly Color-LCD interactive touch-screen system powerful controller with several Programmable and Fixed Value features such as:
 100 Programs and 1200 Segments with Run time of 99H 59M ea. to set up
 Temp-Hum profiles per user requirements.
 Data Storage and profile recall
 Communications: RS485/RS232 - PC Interface
 Temperature & Humidity test chamber
 2.Control Panel    
 a.Lighted Push Button switch for POWER
 b.Lighted Push Button for chamber lighting
 c.RS232/485 port for PC interface
 d.Over Temperature protector – Manually settable
 e.Emergency reset switch (EMO)- Optional
 a.Ground protection
 b.Three phase Over voltage, Under voltage, Phase loss and Phase Sequence Protection
 c.Leakage/Circuit protection
 d.Heater and Humidifier heater short-circuit protection
 e.Circulation Fan motor overload protection 
 f.Compressor Overload protection
 g.Compressor High Pressure protection
 h.Independent over-temperature alarm system
 i.Lack of Water protection (Humidification)
 j.Circuit breaker
 k.Emergency Shut Off Switch (EMO)-Optional
 a.Cable Access:One (2”) (50mm) cable access port with plug
 b.Temp-Humidity Sensors:SUS #304L stainless steel PT 100Ω platinum resistance
 c.AC Power Cord:Low Impedance ,Length 2.5m
 d.Shelves:Two Sets of Stainless Steel Shelves with adjustable Brackets
 e.Door Sealing:Environmentally safe Silicone rubber which is high temperature resistance,aging resistance,with excellent good sealing capability
 f.Casters:Heavy Duty – Set of 4 (adjustable mobile casters)
 g.Humidity Sensing method: Wet and dry bulb
 h.Water Supply:Internal Water Tank Water Inlet Valve
 POWER:220VAC/50/60Hz/Single Phase/15A/6.0KW                                                                   
 Chamber Environment:
 Temperature: 5~28C       Humidity:  <85%



No.22, Hanyuan Road,Xincheng District,Xi'an,China

TEL: 0086-29-85451431

Email: sales@ace-climatic.com

Online Service